6 TIPS TO GET YOUR AIR CONDITIONER READY FOR SUMMER

6 TIPS TO GET YOUR AIR CONDITIONER READY FOR SUMMER

When summer arrives, you change the way of your living compared to winter. For example, you start wearing lightweight clothes to keep you comfortable in rising temperatures. Here, one more thing you should do as the summer starts: ensure your air conditioning is working or not. Yes, it is the most important thing to ensure summer goes well for you and your family.

To get your cooling system ready for this summer, you need to ensure many things such as filters, condenser coils, etc. For this, you should call a central air conditioning repair service in Houston, TX, and ask them to prepare your system for optimal performance. After all, here are six tips to get your system ready. Let’s have a look at them.

START BY ENSURING SAFETY

Before you start checking your AC, you must first turn off the circuit breaker. Don’t work on your air conditioner unit until you shut off the power to the condenser at the service panel. After all, usually, the condenser has a 240-volt weatherproof disconnect box. It has a lever, fuses, and circuit breaker to turn off the condenser. If you don’t know how to do so, call an emergency air conditioning repair service in Texas.

CLEAN OR REPLACE THE FILTERS

While checking your unit, you need to check your furnace or air filters, if they are clogged. If they look blocked, you need to clean and replace them. If you don’t know how to do so, hire a central air conditioning repair service in Houston.

CLEAN THE AIR CONDENSER COILS

After cleaning or replacing the filters, you need to clean the condenser coils and debris fan. You should prefer a professional cleaning from an emergency air conditioning repair service in Texas.

CLEAN AND CLEAR DEBRIS

After completing these steps, you have to clean all leaves and debris from the base of the condenser. If your AC units run with a drain, ensure it is clear. Call a professional maintenance service, if you don’t know how to do it.

CHECK THE COOLANT LINES

Refrigerant tubes and pipes work through an air conditioner evaporator along with an air handler and outside condenser. All these things have foam coolant insulation. So, you should check if these lines are properly insulated.

TEST THE UNIT

After successfully performing all the above steps, you need to test your unit. For this, turn on the power to the condenser and other required parts. After that, set the thermostat to cool. That’s all. Your AC is ready for summer. Call a professional repair service in case of any issues.